ZyXEL Communications P-334W - Manual (Page 421)

Prestige 334W User’s Guide
Call Scheduling 37-3
Table 37-1 Menu 26.1 Schedule Set Setup
FIELD DESCRIPTION EXAMPLE
Weekday:
Day
If you selected Weekly in the How Often field above, then select the
day(s) when the set should activate (and recur) by going to that day(s)
and pressing [SPACE BAR] to select Yes, then press [ENTER]. Yes
No
N/A
Start Time Enter the start time when you wish the schedule set to take effect in hour-
minute format. 09:00
Duration Enter the maximum length of time this connection is allowed in hour-
minute format. 08:00
Action Forced On means that the connection is maintained whether or not there
is a demand call on the line and will persist for the time period specified in
the Duration field.
Forced Down means that the connection is blocked whether or not there
is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call
on the line. Disable Dial-On-Demand means that this schedule prevents
a demand call on the line.
Forced On
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.