ZyXEL Communications P-334W - Manual (Page 295)

Prestige 334W User’s Guide
Menu 2 WAN Setup 22-1
Chapter 22
Menu 2 WAN Setup
This chapter describes how to configure the WAN using menu 2.
22.1 Introduction to WAN
This chapter explains how to configure settings for your WAN port.
22.2 WAN Setup
From the main menu, enter 2 to open menu 2.
Figure 22-1 Menu 2 WAN Setup
The following table describes the fields in this menu.
Table 22-1 Menu 2 WAN Setup
FIELD DESCRIPTION
MAC Address
Assigned By Press [SPACE BAR] and then [ENTER] to choose one of two methods to assign a
MAC Address. Choose Factory Default to select the factory assigned default MAC
Address. Choose IP address attached on LAN to use the MAC Address of that
computer whose IP you give in the following field.
IP Address This field is applicable only if you choose the IP address attached on LAN method in
the Assigned By field. Enter the IP address of the computer on the LAN whose MAC
you are cloning.
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel: