ZyXEL Communications P-334W - Manual (Page 164)

Prestige 334W User’s Guide
11-2 Static Route Screens
Figure 11-2 Static Route
The following table describes the labels in this screen.
Table 11-1 Static Route
LABEL DESCRIPTION
# Number of an individual static route.
Name Name that describes or identifies this route.
Active This field shows whether this static route is active (Yes) or not (No).
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is an immediate neighbor of your
Prestige that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your Prestige; over the WAN, the gateway must
be the IP address of one of the remote nodes.
Edit Select a static route index number and then click Edit to set up a static route on the
Prestige.
11.2.1 Configuring Route Entry
Select a static route index number and click Edit. The screen shown next appears. Fill in the required
information for each static route.