ZyXEL Communications P-334W - Manual (Page 409)

Prestige 334W User’s Guide
System Maintenance 35-1
Chapter 35
System Maintenance
This chapter leads you through SMT menus 24.8 to 24.10.
35.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the
SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information
on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found
by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.
Figure 35-1 Command Mode in Menu 24
35.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: