ZyXEL Communications P-334W - Manual (Page 51)

Prestige 334W User’s Guide
Wizard Setup 3-3
Table 3-1 Wizard 2: Wireless LAN Setup
LABEL DESCRIPTION
ESSID Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the Prestige, make sure all wireless stations use the same ESSID
in order to access the network.
Choose
Channel ID To manually set the Prestige to use a channel, select a channel from the drop-down list box.
The level of Security can be selected as none, basic or extended. Choose No security to
have no wireless LAN security configured and proceed to the ISP Parameters for Internet
Access screen.
Choose Basic security if you want to configure WEP Encryption parameters.
Choose Extend security to configure a Pre-Shared Key.
The third screen varies depending on which security level you select.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
The wireless stations and Prestige must use the same ESSID, channel ID and WEP
encryption key (if WEP is enabled) for wireless communication.
3.4 Wizard Setup: Screen 3
If you choose Basic, you can setup WEP Encryption parameters.