ZyXEL Communications P-334W - Manual (Page 163)

Prestige 334W User’s Guide
Static Route Screens 11-1
Chapter 11
Static Route Screens
This chapter shows you how to configure static routes for your Prestige.
11.1 Static Route Overview
Each remote node specifies only the network to which the gateway is directly connected, and the Prestige has
no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the following
figure through remote node router R1. However, the Prestige is unable to route a packet to network N3
because it doesn't know that there is a route through the same remote node router R1 (via gateway router R2).
The static routes are for you to tell the Prestige about the networks beyond the remote nodes.
Figure 11-1 Example of Static Routing Topology
11.2 Configuring IP Static Route
Click STATIC ROUTE to open the screen as shown next.