ZyXEL Communications P-334W - Manual (Page 350)

Prestige 334W User’s Guide
28-18 NAT
28.6 Configuring Trigger Port Forwarding
Only one LAN computer can use a trigger port (range) at a time.
Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.
Figure 28-21 Menu 15.3 Trigger Port Setup
The following table describes the fields in this screen.
Table 28-5 Menu 15.3 Trigger Port Setup
FIELD DESCRIPTION EXAMPLE
Rule This is the rule index number. 1
Name Enter a unique name for identification purposes. You may enter up to 15
characters in this field. All characters are permitted - including spaces. Real Audio
Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The Prestige forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Start Port Enter a port number or the starting port number in a range of port numbers. 6970
End Port Enter a port number or the ending port number in a range of port numbers. 7170
Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the Prestige to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Start Port Enter a port number or the starting port number in a range of port numbers. 7070
Menu 15.3 - Trigger Port Setup
Incoming Trigger
Rule Name Start Port End Port Start Port End Port
----------------------------------------------------------------------
1. Real Audio 6970 7170 7070 7070
2. 0 0 0 0
3. 0 0 0 0
4. 0 0 0 0
5. 0 0 0 0
6. 0 0 0 0
7. 0 0 0 0
8. 0 0 0 0
9. 0 0 0 0
10. 0 0 0 0
11. 0 0 0 0
12. 0 0 0 0
Press ENTER to Confirm or ESC to Cancel: