ZyXEL Communications P-334W - Manual (Page 317)

Prestige 334W User’s Guide
Remote Node Configuration 25-3
Table 25-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
FIELD DESCRIPTION EXAMPLE
My Password Enter the password assigned by your ISP when the Prestige calls this
remote node. Valid for PPPoE encapsulation only.
*****
Retype to
Confirm
Type your password again to make sure that you have entered it
correctly. *****
Server This field is valid only when RoadRunner is selected in the Service
Type field. The Prestige will find the RoadRunner Server IP
automatically if this field is left blank. If it does not, then you must enter
the authentication server IP address here.
Relogin Every
(min)
This field is available when you select Telia Login in the Service Type
field.
The Telia server logs the Prestige out if the Prestige does not log in
periodically. Type the number of minutes from 1 to 59 (30
recommended) for the Prestige to wait between logins.
Route This field refers to the protocol that will be routed by your Prestige – IP
is the only option for the Prestige. IP
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes
and press [ENTER] to go to Menu 11.3 - Remote Node Network
Layer Options. No
(default)
Session Options
Edit Filter Sets This field leads to another “hidden” menu. Use [SPACE BAR] to select
Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See
the Remote Node Filter section for more details.
No
(default)
Edit Traffic
Redirect Press [SPACE BAR] to select Yes or No.
Select Yes and press [ENTER] to configure Menu 11.6 Traffic
Redirect Setup. Select No (default) if you do not want to configure this
feature.
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to save
your configuration, or press [ESC] at any time to cancel.