ZyXEL Communications P-334W - Manual (Page 316)

Prestige 334W User’s Guide
25-2 Remote Node Configuration
Figure 25-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
The following table describes the fields in this menu.
Table 25-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
FIELD DESCRIPTION EXAMPLE
Rem Node Name Enter a descriptive name for the remote node. This field can be up to
eight characters. LAoffice
Active Press [SPACE BAR] and then [ENTER] to select Yes (activate remote
node) or No (deactivate remote node). Yes
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] and then
[ENTER] to change to PPPoE or PPTP encapsulation. Ethernet
Service Type Press [SPACE BAR] and then [ENTER] to select from Standard, RR-
Toshiba (RoadRunner Toshiba authentication method), RR-Manager
(RoadRunner Manager authentication method), RR-Telstra or Telia
Login. Choose one of the RoadRunner methods if your ISP is Time
Warner's RoadRunner; otherwise choose Standard. Standard
Outgoing
My Login This field is applicable for PPPoE encapsulation only. Enter the login
name assigned by your ISP when the Prestige calls this remote node.
Some ISPs append this field to the Service Name field above (e.g.,
jim@poellc) to access the PPPoE server.
jim
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A Edit Traffic Redirect= No
Retype to Confirm= N/A
Server= N/A
Relogin Every (min)= N/A
Press ENTER to Confirm or ESC to Cancel: