RAD Data comm IPmux-1 - Manual (Page 56)

Chapter 3 Operation IPmux-1/1E Installation and Operation Manual
3-10 Overview of Menu Operations
Main Menu
Figure 3-8 shows the IPmux-1/1E Main Menu. Access all system configuration and
control functions via this menu.
At any point and from any screen, you can press repeatedly, backing up
until you reach the main menu.
You exit the program only from this menu. In order to prevent unauthorized
access, it is recommended that when you finish a session, you return to the Main
Menu and type 4 to exit the program. A password is then required for reentry.
MAIN MENU
1.System >
2.Configuration >
3.Performance Monitoring >
4.Exit
Select item from the menu: _
Use keys <1> to <4>
Figure 3-8. IPmux-1/1E Main Menu
The Main Menu options are:
1
. System View and modify system parameters
2 . Configuration Define system configuration
3 . Performance Monitoring Monitor system performance
4 . Exit Exit the control software
System Menu
➤
To access the System menu:
• Type 1 (System) in the Main Menu.
From the System menu you can view and configure the following options:
1
. General Information View IPmux-1/1E general information.
2 . Self-Test Results Review self-test results obtained during system
power-up.
3 . Reset Reset IPmux-1/1E.
4 . Event Log View a list of IPmux-1/1E events.
5 . Ping Ping other network devices.
These options are explained in full detail in Appendix E.
Main Menu
↓
1. System
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com