RAD Data comm IPmux-1 - Manual (Page 126)

Appendix E Parameters and Screens IPmux-1/1E Installation and Operation Manual
E-28 DS0 Bundle Configuration
E.9 DS0 Bundle Configuration
This configuration selects the timeslots to be transferred end-to-end for E1/T1
when the operation mode is Fractional or Fractional with CAS. One bundle of
timeslots can be configured in the IPmux-1 TDMoIP link.
DS0 BUNDLE CONFIGURATION
1. Bundle ID 1
2. Timeslot number 1-1
3. Timeslot Current Status SET
ESC. Exit
ACTIVE TIMESLOTS IN THIS BUNDLE: 1
FREE TIMESLOTS: 2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,
18,19,20,21,22,23,24,25,26,27,28,29,30,31
Select item from the menu.
Use key or keys <1> to <3>
Figure E-28. DS0 Bundle Configuration Menu
Table E-20. DS0 Bundle Configuration Parameters
Parameter Possible Values Remarks
Bundle ID 1 This is the only valid option
Timeslot Number E1: Timeslot 0 is always invalid and
timeslot 16 is not valid for
Fractional with CAS data format.
T1: Valid timeslots are 1 to 24
Timeslot Current Status Free
Set Frees the timeslot from the
bundle
Adds the timeslot to the bundle
Active timeslots in this
Bundle Assigned timeslots – read-only
Free Timeslots Unassigned timeslots – read-only
➤ To save the change:
• Type .
IPmux-1 will associate the new timeslot with the bundle.
Main Menu
↓
2. Configuration
↓
5. DS0 Bundle
Configuration
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com