National Instruments BridgeVIEW User Manual

Page 34

Text mode
Original mode

Chapter 1

Introduction

1-11

BridgeVIEW User Manual

(

BridgeVIEW\Activity\Solutions

) that contains the completed VIs

for each activity in this manual. You can view the VI for an activity that
you have not completed yet, or use the VIs in this directory as a means
of verifying your work.

Another good place to start is the

Examples

directory. Use the VI called

readme.vi

, at the top level of this directory, to browse through the

available examples.

If you are going to use device servers, including OPC servers, read
Chapter 8,

Servers

, which contains important information about servers,

including what you need to develop your own device servers.