NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 91)

Setting Up Your Server 3-17
Device with the serial interface
(e.g., Management PC)
*2
Keyboard Mouse
Hub
(multiport repeater)
*1 Any USB keyboard and mouse are not supported.
*2 A leased line cannot be connected directly to this connector.
The console of a management PC can be connected to only serial port B. (BIOS setup required.)
*3 Use the provided branch cable.
*4 Connect the power cord to a circuit breaker of 15 A or less.
*5 Used exclusively with onboard SCSI connector.
USB device *1
USB device *1
FRONT
REAR
Device with the
SCSI interface *5
Device with the
serial interface *2
*3
Finally connect the provided
power cord to the receptacle.
*4
If connecting the server to UPS,
see the explanation below.
Display unit
1 2
B
A