NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 105)

Configuring Your Server 4-9
Memory Configuration
Option Parameter Description Your Setting
System Memory nnn KB Indicates the total capacity of the basic
memory. (View only)
Extended Memory nnnnnnn KB Indicates the total capacity of the
extended memory. (View only)
DIMM Group #1 -
#4 Normal
Disabled
Not installed Indicates the current memory status.
"Normal" indicates the normal status,
"Disabled" indicates a memory error, and
"Not installed" indicates no DIMM installed
(view only).
Group #1 indicates DIMMs in DIMM
sockets #1 and #2.
Group #2 indicates DIMMs in DIMM
sockets #3 and #4.
Group #3 indicates DIMMs in DIMM
sockets #5 and #6.
Group #4 indicates DIMMs in DIMM
sockets #7 and #8.
(Memory is interleaved and two DIMMs
are used in pair.)
Memory Retest Yes
[No] Causes BIOS to retest all memory on the
next boot.
Extended RAM
Step 1MB
1KB
Every location
[Disabled] "1MB" indicates that the memory test is
done in the unit of 1MB. "1KB" indicates
that the memory test is done in the unit of
1KB. "Every location" tests every memory
location. "Disabled" indicates that only
memory initialization is done.
Online Spare
Memory [Disabled]
Enabled Disables or enables online spare memory
feature. See "DIMM" in Chapter 8 for
details.
[ ]: Factory-set