Nec esmpro, Off-line maintenance utility, System diagnostic utility – NEC Express5800/120Rh-2 N8100-1126F User Manual
Page 60: Nec dianascope
2-28 General Description
NEC ESMPRO
The NEC ESMPRO is server management software that runs on the OS. The NEC ESMPRO
includes the NEC ESMPRO Manager for the server monitoring terminal and the NEC ESMPRO
Agent for the server.
NOTE:
For details of major functions of the NEC ESMPRO, system
configuration and setups with the NEC ESMPRO, see Chapter 6.
Available functions of the NEC ESMPRO depend on the OS you install.
Ask your service representative for details.
OFF-LINE MAINTENANCE UTILITY
The Off-line Maintenance Utility is used for maintenance and fault analysis of the server. This
utility is usually used by the service representative.
Refer to Chapter 8 for details.
SYSTEM DIAGNOSTIC UTILITY
The system diagnostic utility contained in the NEC EXPRESSBUILDER is useful to detect
hardware failures. See Chapter 7 for details.
NEC DianaScope
The NEC DianaScope is a software for the remote management of the NEC Express5800 series.
The NEC DianaScope can control the managed server even if OS is not running on the managed
server.
See Chapter 6 and online document in the NEC EXPRESSBUILDER.