NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 106)

4-10 Configuring Your Server
PCI Configuration
– Embedded SCSI submenu
Option Parameter Description Your Setting
SCSI Controller [Enabled]
Disabled Enables or disables the onboard SCSI
controllers.
Option ROM Scan [Enabled]
Disabled If Enabled, initialize device expansion ROM.
[ ]: Factory-set
– Embedded NIC (Dual Gbit) submenu
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled] If Disabled, the BIOS will hold the
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
Option ROM Scan [Enabled]
Disabled If Enabled, initialize device expansion ROM.
[ ]: Factory-set
– Embedded Video Controller submenu
Option Parameter Description Your Setting
Onboard VGA
Control Disabled
[Enabled] If Disabled, the BIOS will hold the
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
[ ]: Factory-set
Option Parameter Description Your Setting
PCI Slot 1B/2B/3B
Option ROM Disabled
[Enabled] Used to enable or disable an option ROM
on a PCI board connected to the full-height
riser card.
PCI Slot 1C/2C/3C
Option ROM Disabled
[Enabled] Used to enable or disable an option ROM
on a PCI board connected to the low-profile
riser card.
Option PCI-X
Riser Support [Disabled]
Enabled Used to enable or disable an option N8112-
02 riser card (PCI-X).
PCIe Option Mode [Disabled]
Enabled Cannot be used in this system. Do not
change the factory setting.
[ ]: Factory-set