NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 101)

Configuring Your Server 4-5
Main
Option Parameter Description Your Setting
System Time HH:MM:SS Set the system time.
System Date MM/DD/YYYY Set the system date.
Legacy Floppy A Disabled
360Kb 5
1 /
4
1.2MB 5 1 /
4
720Kb 3 1 /
2
[1.44/1.25MB 3 1 /
2
]
2.88MB 3 1 /
2
Set the settings of floppy disk
drive A (standard configuration).
Legacy Floppy B [Disabled]
360Kb 5
1 /
4
1.2MB 5 1 /
4
720Kb 3 1 /
2
1.44/1.25MB 3 1 /
2
2.88MB 3 1 /
2
Set the settings of floppy disk
drive B. No second floppy disk
drive is included in this system.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds Allows slower spin-up drives to
come ready.
Primary IDE Master/
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Serial ATA Channel 0
Master
Serial ATA Channel 1
Master Select submenu Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Processor Settings Select submenu Shows the processor settings
submenu.
Language [English (US)]
Italiano
Español
Français
Deutsch Select which language BIOS
displays.
[ ]: Factory-set