NEC Express5800/120Rh-2 N8100-1126F User Manual
Page 137
Configuring Your Server 4-41
4.
[Deleting information] window appears. Select the hard disk drive you wish to delete its
partition or boot block, or select [None], then press Enter.
Drive ID 0:
Data in drive 0 is entirely erased. Data in drive 1 is reserved.
Drive ID 1:
Data in drive 1 is entirely erased. Data in drive 0 is reserved.
Drive ID 0 & 1:
All the data in both drives is erased.
None:
Array is deleted, but the data is reserved in both drives.
The [Deleting information] window is not displayed, proceed to the next step.
IMPORTANT:
The partition or boot block of the hard disk drive
selected [Deleting information] is deleted.
5.
Select [Yes] for the message [Are you sure?] and press Enter.
Selecting [No] returns to the main menu without deleting any array.