NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 113)

Configuring Your Server 4-17
System Management Submenu
Option Parameter Description Your Setting
BIOS Version – Displays the current BIOS version.
(View only)
IPMI Specification
Version – Displays IPMI specification version.
(View only)
BMC Device ID – Displays BMC device ID. (View only)
BMC Device
Version – Displays BMC device version. (View
only)
BMC Firmware
Version – Displays BMC firmware version. (View
only)
PIA Version – Displays version of the platform
information area. (View only)
SDR Revision – Displays revision of the sensor data
record.
[ ]: Factory-set
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the address/interrupt of the
serial port to which a remote console
is connected.
ACPI Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the serial port to which an
ACPI console is connected.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K Specify the baud rate used for the
interface with successive remote
consoles.
Flow Control None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD Specify the flow control method.
Console Type [PC ANSI]
VT100+
VT-UTF8 Specify the type of remote console.
[ ]: Factory-set
Console Redirection Submenu
Option Parameter Description Your Setting
Clear all Event
Logs – Press Enter and select "Yes" to clear
the system event log.