NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 116)

4-20 Configuring Your Server
Running the Utility
To run the utility, perform the following procedures:
1. Power on the server.
The following message appears while POST is in progress.
IMPORTANT: The message appears for each additional SCSI
controller.
Adaptec SCSI BIOS Vxxx xxxxx
(c) 2000 Adaptec, Inc. All Rights Reserved
Press for SCSISelect(TM) Utility!
2. Press and hold Ctrl and A.
The SCSISelect utility starts and its Main menu appears.
3. Select the channel and press Enter.
AIC-7902 A at Slot 23 02:03:00
AIC-7902 B at Slot 23 02:03:01
NOTE: "AIC-7902A" is for backup file devices. "AIC-7902B" is for
internal SCSI hard disk drives.
The Options menu appears.
4. Select option in the Options box and press Enter.
AIC-7902 at slot 23, 03:03:00
Would you like to configure the SCSI controller, or run the
SCSI Disk Utilities? Select the option and press .
Options
SCSI Disk Utilities
Enable HostRAID Support
Configure/View SCSI Controller Settings
If you wish to configure the adapter or a device, select "Configure/View SCSI Controller
Settings".
If you wish to format a disk, verify disk media, or display a list of devices and their SCSI
IDs, select "SCSI Disk Utilities".