NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 104)

4-8 Configuring Your Server
Advanced
Option Parameter Description Your Setting
Memory Configuration – Displays Memory Configuration
submenu.
PCI Configuration – Displays PCI Configuration
submenu.
Peripheral Configuration – Displays Peripheral Configuration
submenu.
Advanced Chipset Control – Displays Advanced Chipset Control
submenu.
Boot-time Diagnostic
Screen [Enabled]
Disabled When disabled, the BIOS will display
the NEC logo during POST. Press
Esc to switch to the POST execution
screen.
Reset Configuration Data [No]
Yes Select "Yes" if you want to clear the
system configuration data during the
next boot. Automatically reset to
"No" in the next boot.
NumLock [Auto]
On
Off Sets power on Numlock state.
Memory/Processor Error [Boot]
Halt If "Halt" is selected, the boot is
stopped when POST error occurs.
SATA RAID Enable [Disabled]
Enabled Cannot be used in this system.
[ ]: Factory-set