NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 376)

E-14 Installing Windows Server 2003
Updating the System - Installing Service Pack -
IMPORTANT: If you install Windows Server 2003 CD-ROM which
contains Service Pack 1 to your system, you do not have to apply
Service Pack 1 again.
To ensure normal system operation you should update your system using the following procedures.
1. Logon to the system using the administrator account or other account which is a member
of the Administrators group.
2. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu is automatically appeared on the screen.
3. Click on [Setup] with left mouse button and click on [Update NEC Express5800 system]
section.
4. Continue your work for system update as the following message.
5. Click on [Restart Computer] to restart the system.
6. Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive immediately
after clicking on [Restart Computer]
IMPORTANT: If you change the configuration of the system (by
adding or removing hardware or Operating system software
components) or repair the system, you must run the system update
again.