National Instruments AT-MIO-16X - Manual (Page 238)

Appendix B I/O Connector
AT-MIO-16X User Manual B-6 © National Instruments Corporation
40 43 OUT1 OUTPUT1—This pin is from the Am9513A
Counter 1 signal.
6 44 EXTTMRTRIG* External Timer Trigger—If selected, a
high-to-low edge on EXTTMRTRIG*
results in the output DACs being updated
with the value written to them in the posted
update mode. EXTTMRTRIG* will also
generate a timed interrupt if enabled.
5 45 GATE2 GATE2—This pin is from the Am9513A
Counter 2 signal.
38 46 OUT2 OUTPUT2—This pin is from the Am9513A
Counter 2 signal.
37 47 SOURCE5 SOURCE5—This pin is from the Am9513A
Counter 5 signal.
3 48 GATE5 GATE5—This pin is from the Am9513A
Counter 5 signal.
2 49 OUT5 OUT5—This pin is from the Am9513A
Counter 5 signal.
1 50 FOUT Frequency Output—This pin is from the
Am9513A FOUT signal.
Table B-1. Signal Connection Descriptions (Continued)
68-Pin Pins 50-Pin Pins Signal Names Descriptions