Configmemclr register, Configmemclr register -47 – National Instruments AT-MIO-16X User Manual
Page 143
Chapter 4
Register Map and Descriptions
© National Instruments Corporation
4-47
AT-MIO-16X User Manual
CONFIGMEMCLR Register
Accessing the CONFIGMEMCLR Register clears all information in the
channel configuration memory and resets the write pointer to the first
location in the memory.
Address:
Base address + 1B (hex)
Type:
Read-only
Word Size:
8-bit
Bit map:
Not applicable, no bits used
Strobe Effect:
Clears the channel configuration memory
Before the channel configuration memory is written to, it must be
cleared of its existing information and reset to an initialized state. This
process is accomplished by accessing the CONFIGMEMCLR Register.
Once the existing channel configuration values are cleared, they are not
recoverable. At this point, the channel configuration memory is ready
to be filled with valid information.