Palm Pre Plus - Manual (Page 60)

60 Chapter 4 : Phone
Use a wired headset
Your phone works with headsets that have a 3.5mm connector (look for
three colored bands on the plug). When in doubt, ask the third-party
headset manufacturer if the product is compatible with your phone. If you
hear a headset buzz or poor microphone performance, your headset may be
incompatible with your phone.
1 Connect the headset. While on a call, the icon changes to .
2 The headset button performs different actions depending on what’s
happening on the phone. Press the headset button once to perform
any of the following tasks:
• Answer an incoming call
• Respond to call waiting
• Hang up a single active call or all calls on a conference call
3 If you want to stop using the headset, do any of the following:
• Switch from the headset to your phone’s speaker: Tap and tap
Speaker .
• Switch from the wired headset to a previously paired Bluetooth ®
hands-free device: Tap and tap the device name.
• Use your phone without the headset: Disconnect the headset.
Set up and use a Bluetooth ® hands-free device
Your phone is compatible with many headsets and car kits (sold separately)
enabled with Bluetooth
® wireless technology version 2.1, with EDR and
Stereo (with AVRCP media controls).
After you set up a connection with a Bluetooth headset or hands-free car kit,
you can communicate using that device whenever it is within range and the
Bluetooth feature on your phone is turned on. The range varies greatly,
depending on environmental factors. The maximum is about 30 feet (10
meters).
NOTE You can use a stereo (A2DP-enabled) Bluetooth headset or speakers to
listen to music files on your phone. You cannot, however, use a mono Bluetooth
headset to listen to music files.
1 Open Bluetooth .
2 If the Bluetooth setting at the top of the screen is off, tap Off to switch
the Bluetooth feature from Off to On.
3 Tap Add device and tap the device name.
4 To use a Bluetooth device with your phone, follow the instructions that
came with the Bluetooth device.
5 To switch to another Bluetooth device while on a call: Tap and tap
the new device name. You can also tap Handset or Speaker to use
your phone without the headset.
For more information on using the Bluetooth feature on your phone, see
Bluetooth ® wireless technology .
TIP If you make a Bluetooth connection with a car kit, you might get a notification
on your phone asking if you want to upload contacts to the car kit. Tap Allow to
upload contacts. If you later want to delete the contacts from the car kit, check the
car kit documentation for instructions.