Palm Pre Plus - Manual (Page 142)

142 Chapter 8 : Web and wireless connections
2 Tap the connected device name to disconnect from it. Or tap another
device name to disconnect from the current device and connect to the
new device.
Delete a device
Deleting a device means you end the relationship you created between your
phone and the device. This means that you will need to pair with the device
again if you want to connect (see
Make a pairing request to another device
or Accept a pairing request from another device ). If all you want to do is
temporarily disconnect from a device, see Disconnect from a device .
1 Open Bluetooth .
2 Throw the name off the side of the screen and tap Delete .
Rename a device
1 Open Bluetooth .
2 Tap and hold the device name.
3 Enter a new name.
Use your phone as a modem
BEFORE YOU BEGIN Check with Verizon Wireless to see if your service
plan supports this feature.
You can use your phone as a modem by setting up a personal area network
(PAN). Using your phone as a modem lets you access the Internet from your
computer anywhere you can connect to the Verizon Wireless network.
1 Pair your phone and your computer. You must initiate the pairing
request from your computer (see
Accept a pairing request from
another device ).
2 After the two devices are paired, make a Bluetooth connection from
your computer to your phone. You must initiate the connection from
your computer.
3 To check the connection, open your computer's web browser. If the
browser opens successfully to your home page, the connection is
working.