Paradyne ACCULINK 316x - Manual (Page 93)

Operation
3-51 3160-A2-GB22-10 December 1996
Configuring for External Timing Example
To configure network timing,
1. Press F3 to select Cnfig from the top-level menu
screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. From the Edit screen, press the key twice to
bring the Gen selection onto the screen.
F1
Edit:
DTE
Port NET
F2 F3
5. Press F3 to select Gen for the general
configuration options.
F1
Edit:
NET
Chan Gen
F2 F3
6. The Generate Yellow Alarm configuration option
displays first. Press F1 (next) once to display the
DSU/CSU Clock Source configuration option.
F1
GenYellow:Enab
Next
Enab Disab
F2 F3
7. Select the master clock source. For external, press
the key three times to scroll the Ext selection
onto the screen.
F1
Clock Src:NET
Next
NET DTE
F2 F3
8. Press F3 to select external timing.
F1
Clock Src:NET
Prt1
Int Ext
F2 F3
9. Select the appropriate external clock rate by
pressing the corresponding Function key. This step
is mandatory if you have chosen external clocking.
F1
Clock Rate:1544
Next
2048 1544
F2 F3
Differences Using the Async Terminal: To configure
network timing, select General from the main/
configuration/edit menu.