Configuration options, Functional grouping – Paradyne ACCULINK 316x User Manual
Page 142
C-1
3160-A2-GB22-10
December 1996
Configuration Options
C-1
C-2
DTE Interface Configuration Options
C-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C-4
Network Interface Configuration Options
C-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C-9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C-12
User Interface Configuration Options
C-13
C-17
C-20
Functional Grouping
The 316x DSU/CSU configuration option tables
contain a list of all configuration options and their
selections for a functional group within the front panel
menu. The configuration options are arranged into seven
functional groups:
•
DTE Interface Configuration Options
The DTE Interface configuration options configure
the DSX-1 Drop/Insert port of the 316x DSU/CSU
(Table C-1).
•
Port Configuration Options
The Port configuration options configure ports on
the 316x DSU/CSU (Table C-2).
•
Network Interface Configuration Options
Network Interface configuration options configure
the Network Interface of the 316x DSU/CSU
(Table C-3).
•
Channel Configuration Options
The Channel configuration options configure the
DTE and data port channels on the 316x DSU/CSU
(Tables C-4 and C-5).
•
General Configuration Options
The General configuration options configure alarms
and clocks on the 316x DSU/CSU (Table C-6).
•
User Interface Configuration Options
User Interface configuration options configure and
control the 316x DSU/CSU User Interfaces
(Table C-7).
•
Alarm Configuration Options
Alarm configuration options specify how alarm
conditions are handled by the 316x DSU/CSU
(Table C-8)
•
SNMP Configuration Options
SNMP Configuration Options configure the
3160/3164 DSU/CSU to be managed using SNMP
(Tables C-9 and C-10).
The configuration tables include a description of each
configuration function and its selectable options. In the
tables, the top line of each configuration option entry
indicates the factory default setting. When the Factory 1
default differs from the Factory 2 default, the Factory 1
default is listed first and both defaults are clearly marked.
C