Paradyne ACCULINK 316x - Manual (Page 131)

Maintenance
4-15 3160-A2-GB22-10 December 1996
2. From the Test screen, press once to display
the Lamp selection on the screen.
F1
Test:
Rlpbk Lpbk
Ptrns
F2 F3
3. From the Test screen, press F3 to select Lamp.
F1
Test:
Lpbk
Ptrns Lamp
F2 F3
4. From the Lamp Test screen, press F2 to select
Start.
F1
Lamp Test:
Abort
Start
F2 F3
5. The following screens alternately appear on the
LCD until you press a Function key to return to
the Lamp Test screen. In addition, all LEDs blink.
F1 F2 F3
F1
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F2 F3
6. When you are satisfied that all LEDs are lighting
and the LCD is functioning properly, you can
abort the Lamp test from the Lamp Test screen.
The Device Health and Status screen appears
automatically if there is no activity on the
DSU/CSU front panel for five minutes. However,
the Lamp test remains active until it is aborted.
Aborting a Lamp Test
To abort the Lamp test,
1. Display the Lamp Test screen. To do this when the
LCD is alternating the Lamp test screens, press
any function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.
F1
Lamp Test:
Abort
Start
F2 F3
2. From the Lamp Test screen, press F1 to select
Abort.
F1
Lamp Test:
Abort
Start
F2 F3