Paradyne ACCULINK 316x - Manual (Page 90)

ACCULINK 316x DSU/CSU
3-48 December 1996 3160-A2-GB22-10
Clearing DS0 Channel Allocation
You can clear (unallocate) all the DS0 channels
currently allocated to either the Network T1 interface or
the DSX-1 Drop/Insert T1 interface.
To clear DS0 channel allocation,
1. Press F3 to select Cnfig from the top-level menu
screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. Press the key from the Edit screen to display
the Chan selection.
F1
Edit:
DTE
Port NET
F2 F3
5. Press F3 to select Chan.
F1
Edit:
Port
NET Chan
F2 F3
6. From the Channel Config screen, press F2 to
select Clear.
F1
Channel Config:
Dsply
Clear DTE
F2 F3
7. From the Clear Channel screen, press F1 (NET) to
clear all DS0 channels assigned to the Network T1
interface. Or, press F2 (DTE) to clear all DS0
channels assigned to the DSX-1 Drop/Insert T1
interface.
F1
Clear Channel:
NET
DTE
F2 F3
Differences Using the Async Terminal: To clear DS0
channel allocations, use the appropriate clear selections on
the main/configuration/edit/channel menu. See the async
terminal menu hierarchy (Figure 3-15) for the Clear
selections.