Paradyne ACCULINK 316x - Manual (Page 82)

ACCULINK 316x DSU/CSU
3-40 December 1996 3160-A2-GB22-10
Displaying DS0 Channel Assignments
Use the Display command for channel configuration to
view how the DS0 channels for either the DSX-1
Drop/Insert T1 interface or the Network interface are
currently allocated. The display appears on the front panel
LCD.
Line 1 of the display shows the 24 channels of the
selected interface. Pressing or scrolls the next
three channels onto the LCD. Line 2 displays what is
allocated to the DS0 channel listed in Line 1. Symbols
used in the display are shown in Table 3-8.
Table 3-8
Display Channel Symbols
Symbol Meaning
– DS0 channel is not
allocated
Prt n DS0 channel is allocated to
Port
n, where n is 1, 2, 3,
or 4.
N n DS0 channel is allocated to
Network T1 interface DS0
channel
n where n can be
any number from 1 through
24.
D n DS0 channel is allocated to
DSX-1 Drop/Insert T1
interface DS0 channel
n
where n can be any
number from 1 through 24.
To display the DS0 channel allocation,
1. Press F3 to select Cnfig from the top-level menu
screen.
F1 F2 F3
DSU ESF
Stat
Test Cnfig
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. Press the key from the Edit screen to display
the Chan selection.
F1
Edit:
DTE
Port NET
F2 F3
5. Press F3 to select Chan.
F1
Edit:
Port
NET Chan
F2 F3
6. From the Channel Config screen, press F1 to
select Dsply (display).
F1
Channel Config:
Dsply
Clear DTE
F2 F3