Paradyne ACCULINK 316x - Manual (Page 61)

Operation
3-19 3160-A2-GB22-10 December 1996
4. From the Edit screen, select the functional group
you want to edit by pressing the appropriate
function key. Use the scroll keys, if necessary.
F1
Edit:
DTE
Port NET
F2 F3
The configuration options for the selected
functional group appear on the front panel one
option at a time. The option name appears on Line
1 with the current value next to it. To reach other
options, use the Next and Previous selections to
scroll forward and backward through the group of
options.
F1
NET Framing: ESF
Next
D4 ESF
F2 F3
5. Press the appropriate Function key to choose
another value. Use the scroll keys, if necessary.
6. Use the Save procedure to save your changes to
the Active or Customer area.
Differences Using the Async Terminal: When
displaying/editing a configuration option set from the
async terminal, select Configuration from the main
menu. The main/configuration screen appears with the
Load From field in the display area as shown in
Figure 3-16.
Customer ID: New Cust main/configuration
Model: ACCULINK XXXX
Load From: ______
Load Main Previous Cntrl–x to Disconnect
Figure 3-16. Load From Screen
Populate this field with a valid configuration option set
value and select Load at the bottom of the screen. The
configuration option set is loaded and the main/
configuration/load screen appears with the Save To field
as shown in Figure 3-17.
Customer ID: New Cust main/configuration/load
Model: ACCULINK XXXX
Load From: ______
Edit Save Main Previous Cntrl–x to Disconnect
Save To: ______
Cust
Figure 3-17. Save To Screen