Pin assignments, Cables, T1 network connector interface – Paradyne ACCULINK 316x User Manual
Page 165
D-1
3160-A2-GB22-10
December 1996
Pin Assignments
D-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T1 Network Connector Interface
D-1
D-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Integral Modem Service Port Interface
D-5
D-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-7
EIA-530A DB25 Port Interface Connector
D-9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RS449 Port Interface Connector
D-10
D-12
D-14
D-14
D-15
D-16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables
The ACCULINK Models 3160/3164 DSU/CSUs are
shipped with a power transformer and a VF cable. Various
other interconnecting cables are available from the
company. These cables have a company feature number
assigned to them (see Appendix H, Equipment List).
Cables that are listed, but have no feature number, must be
customer-supplied. This appendix describes the cable pin
assignments for both company cables and
customer-supplied cables. You can use this information
should you need to build your own cables.
Model 3161 DSU/CSU interface connections are
described in the COMSPHERE 3000 Series Carrier
Installation Manual, with the rest of the installation
instructions for the Model 3161 DSU/CSU.
T1 Network Connector
Interface
The T1 line interface cable is 20-foot, 24 AWG solid,
2-twisted pair cable with an RJ48C, plug unkeyed
connector (Figures D-1 and D-2). The T1 network
interface connector is an RJ48C, 8-position, unkeyed
modular jack (Tables D-1 and D-2).
D