Paradyne ACCULINK 316x - Manual (Page 103)

Operation
3-61 3160-A2-GB22-10 December 1996
3. From the Control screen, press to scroll
ClrUsr on the screen.
F1
Control:
Call
Rel LED
F2 F3
4. Press F3 to select ClrUsr.
F1
Control:
Rel
LED ClrUsr
F2 F3
5. From the Clear Registers screen, press F1 to clear
the User registers or press F2 if you have decided
not to clear the User registers.
F1
Clear Regs?
Yes
No
F2 F3
If you selected Yes, the User performance
registers are cleared. All accumulators are reset to
zero and all status registers are cleared, and the
current interval timer, the number of valid
intervals count and the total 24-hour counts are
reset to zero. The Command Complete screen then
appears.
F1
Clear Registers:
Command Complete
F2 F3
If you selected No, the Ctrl screen reappears and
no registers are reset.
Differences Using the Async Terminal: To reset the
User registers, select Clear User Performance Registers
from the main/control menu (see Figure 3-39). The system
prompts Are You Sure? so you can verify your intention
to reset the registers. Respond with Yes to proceed with
the Clear command.
Controlling the DSU/CSU
The Control branch of the front panel menu tree allows
you to control various aspects of the user interface and
integral modem. Figure 3-38 shows the Control branch.
Figure 3-38. Control Branch
Differences Using the Async Terminal: Figure 3-39
shows the Control branch using the async terminal.
Figure 3-39. Control Branch for the
Async Terminal