Paradyne ACCULINK 316x - Manual (Page 109)

Operation
3-67 3160-A2-GB22-10 December 1996
Differences Using the Async Terminal: To disconnect
an established modem connection, select Disconnect from
the main/control/call_setup screen. Figure 3-41 shows an
example of the screen that appears. The Async Terminal
feature does not support the pass-through disconnect
feature.
Customer ID: New Cust main/control/call_setup
Model: ACCULINK XXXX
Main Previous Cntrl–x to Disconnect
Call Setup
Disconnect
Directory Number: _____
Directory Phone Number:
Figure 3-41. Disconnect Screen
Entering Numbers in the Phone Directories
The 3160/3164 DSU/CSUs have five general
directories (1 through 5) and one alarm directory (A)
available. Use the general directories to store phone
numbers for remote devices such as 3160/3164
DSU/CSUs and ASCII printers. Use the alarm directory to
store the phone number of the primary ASCII terminal or
printer you use to display or print alarms. This function is
not available for 3161 DSU/CSUs.
To enter or change numbers in the phone directories,
1. Press the key from the top-level menu screen
to bring the Ctrl branch onto the front panel LCD.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Press F3 to select Ctrl from the top-level menu
screen.
F1
DSU ESF
Test
Cnfig Ctrl
F2 F3
3. From the Control screen, press F1 to select Call.
F1
Control:
Call
Rel LED
F2 F3
4. From the Call Setup screen, press F3 to select
ChDir.
F1
Call Setup:
Pass
Dial ChDir
F2 F3
The Directory 1 displays first, along with its
phone number if one has been entered.
5. Press F1 (Next) to display the next directory (2, in
this case). Press F2 (Previous) to display the
previous directory (A, in this case). Directories
appear in order, 1–5 and then A.
F1
1: xxxxxxxxxxxxxxxxx
Next
Prev Edit
F2 F3