Paradyne ACCULINK 316x - Manual (Page 67)

Operation
3-25 3160-A2-GB22-10 December 1996
To select the MODEM port as the link to the SNMP
manager from the front panel,
1. Press F3 to select Cnfig from the top-level menu
screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. Press the key from the Edit screen to display
the User selection.
F1
Edit:
DTE
Port NET
F2 F3
5. Press F3 to select User.
F1
Edit:
Chan
Gen User
F2 F3
6. Press the F1 (Next) key until the Modem Use
configuration option appears.
F1
Self-Test:Enab
Next
Enab Disab
F2 F3
7. Press F2 to configure the MODEM port as the
management link to an external SNMP manager.
F1
Modem Use:
Next
SNMP ASCII
F2 F3
To select the COM port as the link to the SNMP
manager,
1. Press F3 to select Cnfig from the top-level menu
screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3