Paradyne ACCULINK 316x - Manual (Page 85)

Operation
3-43 3160-A2-GB22-10 December 1996
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. Press the key from the Edit screen to display
the Chan selection.
F1
Edit:
DTE
Port NET
F2 F3
5. Press F3 to select Chan.
F1
Edit:DTE
Port
NET Chan
F2 F3
6. From the Channel Config screen, press the
key to scroll the ports onto the screen.
F1
Channel Config:
Dsply
Clear DTE
F2 F3
7. Select the desired port by pressing its
corresponding Function key.
F1
Channel Config:
Prt1
Prt2 Prt3
F2 F3
8. The configuration option for the data port
channel allocation destination appears on the
screen. Press F2 (NET) to assign this port to the
Network T1 interface, or F3 (DTE) to assign this
port to the DSX-1 Drop/Insert T1 interface.
F1
Assign To:NET
Next
NET DTE
F2 F3
9. Press F1 (Next) to display the appropriate
configuration options on the screen. Use one of
the following examples, depending on whether
you are assigning by block, ACAMI, or i.
Differences Using the Async Terminal: To allocate data
ports, choose a port selection from the main/
configuration/edit/channel menu. From these screens, you
can specify whether the assignment is by block, ACAMI,
or individual port.
Block Channel Assignment Method Example
To assign by the block method,
1. The Assign By configuration option screen
appears after you select a port. To assign by block,
press F2 (Block).
F1
Assign By:Block
Next Block ACAMI
F2 F3
2. Press F1 (Next) to display the next configuration
option (Port Rate).
F1
Assign By:
Next Block ACAMI
F2 F3