Installation, Overview, Planning – Paradyne ACCULINK 316x User Manual
Page 24
2-1
3160-A2-GB22-10
December 1996
Installation
2-1
2-1
2-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5
2-5
2-6
Installing the +24 Vdc Power Supply
2-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Single – 48 Vdc Power Supply
2-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Redundant – 48 Vdc Power Supply
2-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-9
Selecting a Model 3161 DSU/CSU
2-10
2-10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Establishing Access Security on a Port
2-12
2-12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-14
Factory Default Configuration Options
2-16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Front Panel Emulation Software
2-16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enabling/Disabling the Front Panel
2-17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
This chapter contains information for installing your
3160/3164 DSU/CSU: planning considerations, a list of
what you should receive in the DSU/CSU box, and a
Quick Start section for experienced DSU/CSU users who
have no special installation or operation requirements.
More detailed installation instructions are also provided,
including cabling and software configuration option
information.
Installation instructions for the 3161 DSU/CSU are
located in the ACCULINK 3151 CSU and 3161 DSU/CSU
General Information Guide.
Planning
The ACCULINK 316x DSU/CSU is designed to
provide an interface between the T1 digital network and
the Customer Premise Equipment (CPE). The DSU/CSU
must be connected to the CPE through its DSX-1 (DTE)
Drop/Insert port or one of the data ports, and then to the
network through the DSU/CSU Network Interface (NET)
port. The most common configurations for the 316x
DSU/CSU are:
•
Point-to-point LAN interconnection (Figure 2-1).
•
Shared access to network-based services
(Figure 2-2 ).
•
Multiport T1 DSU/CSU in a fractional
T1 network (Figure 2-3).
•
Central-site T1 termination for Model 3161
DSU/CSUs (Figure 2-4).
Both voice and data applications are supported.
2