Paradyne ACCULINK 316x User Manual

Page 69

Operation

3-27

3160-A2-GB22-10

December 1996

To assign an IP address to the MODEM port,

1. Press F3 to select Cnfig from the top-level menu

screen.

DSU ESF
Stat

Test

Cnfig

2. Select the configuration option set to be copied

into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.

Load from:
Activ

Cust

Fact1

3. Press F1 to select Edit.

Choose Funct:
Edit

Save

4. Press the

key from the Edit screen to display

the SNMP selection.

Edit:
DTE

Port

NET

5. Press F3 to select SNMP.

Edit:
User

Alarm

SNMP

6. Press F1 to select Gen from the SNMP Config

screen.

SNMP Config:
Gen

Trap

7. Press the F1 (Next) key until the Modem IP Adr

configuration option appears.

System Name:
Next

Edit

Clear

NOTE

Steps 8 and 9 describe the
process for entering an IP
address. This process applies to
any IP address.

8. Press F2 (Edit) to edit the IP address. You have the

option of using F3 (Clear) to reset the IP address
to the factory default 000.000.000.000.

Modem IP Adr:
Next

Edit

Clear