Paradyne ACCULINK 316x - Manual (Page 36)

Installation
2-13 3160-A2-GB22-10 December 1996
To set a password,
1. Press the key on the top-level menu screen to
bring the Ctrl branch onto the front panel LCD.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Press F3 to select Ctrl from the top-level menu
screen.
F1
DSU ESF
Test
Cnfig Ctrl
F2 F3
3. Press the key on the Ctrl screen until the
Passwd selection appears on the front panel LCD.
F1
Control:
Call
Rel LED
F2 F3
4. Press F3 to select Passwd.
F1
Control:
Reset CID Passwd
F2 F3
5. Use the and keys to position the cursor
under the desired character. You must enter a
character before the
moves the cursor to the
next space to the right. The key is not
destructive.
F1
Passwd: _
Up
Down Save
F2 F3
6. Enter the desired password. Press F1 (Up) and
F2 (Down) to scroll up and down through the
valid characters/numbers for the password. Valid
password characters are 0–9, a–z, A–Z, #, –, .,
and /.
F1
Passwd: xxxxxxxx
Up
Down Save
F2 F3
7. Press F3 (Save) to save the password.
F1
Passwd: xxxxxxxx
Up
Down Save
F2 F3
Differences Using the Async Terminal: To set the
password, select miscellaneous/control/options in the
main/control screen. This screen displays the prompt
Change Password? If you enter yes, the screen displays
the Password and Re-enter Password fields as shown in
Figure 2-12.
Customer ID: New Cust
main/control/miscellaneous
Model: ACCULINK XXXX
Save Main Previous Cntrl–x to Disconnect
Miscellaneous Control Options
Front Panel LED Display:_____
Customer Identification Name/Number:_____
Password:_____
Re-enter Password:_____
Change Password?_____ Yes
Figure 2-12. Password Configuration Screen