Paradyne ACCULINK 316x - Manual (Page 102)

ACCULINK 316x DSU/CSU
3-60 December 1996 3160-A2-GB22-10
Differences Using the Async Terminal: To display a
performance report, select Telco Performance or User
Performance from the main/status menu. Select Refresh
to force an update to these screens. Figure 3-36 shows an
example of the Telco Performance Report, and
Figure 3-37 shows an example of the User Performance
Report.
NOTE
The ‘d’ characters in these
screens are place holders to show
field length of actual results.
Customer ID: New Cust main/status/telco_performance
Model: ACCULINK XXXX
Event: dd,ddd
Telco Performance
Valid Intervals: dd Current Timer: ddd
Current:
Total:
Interval:
01
02
___
___
___
___
___
___
ES
ddd
dd,ddd
ddd
___
___
___
___
___
___
___
UAS
ddd
dd,ddd
ddd
___
___
___
___
___
___
___
SES
ddd
dd,ddd
ddd
___
___
___
___
___
___
___
BES
ddd
dd,ddd
ddd
___
___
___
___
___
___
___
CSS
ddd
ddd
ddd
___
___
___
___
___
___
___
LOFC
ddd
ddd
ddd
___
___
___
___
___
___
___
Refresh Down Up Main Previous Cntrl–x to Disconnect
Figure 3-36. Telco Performance Report Screen
Customer ID: New Cust main/status/user_performance
Model: ACCULINK XXXX
Event: dd,ddd
User Performance
Valid Intervals: dd Current Timer: ddd
Current:
24 Total:
Interval:
01
02
ES
ddd
dd,ddd
ddd
ddd
UAS
ddd
dd,ddd
ddd
ddd
SES
ddd
dd,ddd
ddd
ddd
BES
ddd
dd,ddd
ddd
ddd
LOFC
ddd
dd,ddd
ddd
ddd
Refresh Down Up Main Previous Cntrl–x to Disconnect
StEvnt
y,l,
y,l,e
d,d,d,d,d
CSS
ddd
dd,ddd
ddd
ddd
Figure 3-37. User Performance Report Screen
Clearing User Performance Registers
You can reset the User registers from the DSU/CSU via
the ClrUsr command in the Control branch of the front
panel menu. You can only reset the Telco registers via a
command from the network (refer to AT&T TR 54016).
To clear the user performance registers,
1. Press the key on the top-level menu screen to
bring the Ctrl branch onto the screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Press F3 to select Ctrl from the top-level display
screen.
F1
DSU ESF
Test
Cnfig Ctrl
F2 F3