Symbol Technologies AP-5131 - Manual (Page 82)

AP-5131 Access Point Product Reference Guide 4-6
7. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
4.2 Configuring Data Access
Use the AP-5131 Access screen to enable/disable data throughput to the AP-5131’s LAN1, LAN2
and/or WAN interfaces and display screens for changing administrator passwords.
Use the AP-5131 Access screen checkboxes to enable or disable LAN1, LAN2 and/or WAN access
using the protocols and ports listed. If access is disabled, this effectively locks out the administrator
from configuring the AP-5131 using that interface. To avoid jeopardizing the network data managed
by the AP-5131, Symbol recommends enabling only those interfaces used in the routine (daily)
management of the network, and disabling all other interfaces until they are required.
To configure access for the AP-5131:
1. Select System Configuration -> AP-5131 Access from the AP-5131 menu tree.
2. Use the AP-5131 Access field checkboxes to enable/disable the following AP-5131 on the
AP-5131’s LAN1, LAN2 or WAN interfaces: