Symbol Technologies AP-5131 - Manual (Page 309)

Command Line Interface Reference 8-15
AP5131>admin(network.lan)> set
Description:
Sets the LAN parameters for the LAN port.
Syntax:
Example:
admin(network.lan)>
admin(network.lan)> set lan 1 enable
admin(network.lan)> set name 1 engineering
admin(network.lan)> set ethernet-port-lan 1
admin(network.lan)> set timeout 45
admin(network.lan)> set trunking 1 disable
admin(network.lan)> set dns 1 192.168.0.1
admin(network.lan)> set dns 2 192.168.0.2
admin(network.lan)> set wins 1 192.168.0.254
admin(network.lan)> set trunking disable
admin(network.lan)> set username phil
admin(network.lan)> set passwd ea0258c1
Related Commands:
For information on configuring the AP-5131 LAN using the applet (GUI), see Configuring the LAN Interface on page 5-1 .
set lan Enables or disables the AP-5131 LAN interface.
name Defines the LAN name by index.
ethernet-port-lan Defines which LAN (LAN 1 or LAN 2) is active on the AP-5131’s Ethernet port.
timeout Sets the interval (in seconds) the AP-5131 uses to terminate its LAN interface
if no activity is detected for the specified interval.
trunking Enables or disables 802.11q Trunking over the AP-5131 LAN port.
username Specifies the user name for 802.1x port authentication over the LAN
interface.
passwd The 0-32 character password for the username for the 802.1x port.
ip-mode Defines the AP-5131 LAN port IP mode.
ipadr Sets the IP address used by the LAN port.
mask Defines the IP address used for AP-5131 LAN port network mask.
dgw Sets the Gateway IP address used by the LAN port.
domain Specifies the domain name used by the AP-5131 LAN port.
dns Defines the IP address of the primary and secondary DNS servers used by the
LAN port.
wins Defines the IP address of the WINS server used by the LAN port.
show Shows the current settings for the AP-5131 LAN port.