Ap5131>admin(network.lan.dhcp)> show – Symbol Technologies AP-5131 User Manual
Page 323
Command Line Interface Reference 8-29
AP5131>admin(network.lan.dhcp)> show
Description:
Shows DHCP parameter settings.
Syntax:
Example:
admin(network.lan.dhcp)>
show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address
: 192.168.0.254
Lease Time
: 86400
**LAN2 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address
: 192.168.0.254
Lease Time
: 86400
For information on configuring DHCP using the applet (GUI), see
Configuring the LAN Interface on page 5-1
.
show
Displays DHCP parameter settings for the AP-5131. These parameters are defined with the set command.