Symbol Technologies AP-5131 - Manual (Page 338)

AP-5131 Access Point Product Reference Guide 8-44
AP5131>admin(network.wan.nat)> set
Description:
Sets NAT inbound and outbound parameters.
Syntax:
Example:
admin(network.wan.nat)> set type 1-to-many
admin(network.wan.nat)> set ip 157.235.91.2
admin(network.wan.nat)> set mode 2 disable
admin(network.wan.nat)> set unspec-ip 2 111.223.222.1
admin(network.wan.nat)> show 2
WAN IP Mode : disable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
One to many nat mapping : LAN1 LAN2
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
For an overview of the AP-5131 NAT options available using the applet (GUI), see Configuring Network Address Translation (NAT)
Settings on page 5-19 .
set type Sets the type of NAT translation for WAN address index ( 1 - 8 ) to
(none, 1-to-1, or 1-to-many).
ip Sets NAT IP mapping associated with WAN address to the
specified IP address .
inb enable/disable Sets inbound NAT parameters.
outb Sets outbound NAT parameters.
mode enable/disable Enable or disable the AP-5131’s Unspecified Port Forwarding mode for
the designated NAT index.
unspec-ip Forward unspecified ports for the defined NAT index to the defined IP
address.