Symbol Technologies AP-5131 - Manual (Page 312)

AP-5131 Access Point Product Reference Guide 8-18
AP5131>admin(network.lan.bridge)> set
Description:
Sets the mesh configuration parameters for the AP-5131’s LANs.
Syntax:
Example:
admin(network.lan.bridge)> set priority 2 32768
admin(network.lan.bridge)> set hello 2 2
admin(network.lan.bridge)> set msgage 2 20
admin(network.lan.bridge)> set fwddelay 2 15
admin(network.lan.bridge)> set ageout 2 300
admin(network.lan.bridge)> show
** LAN1 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the AP-5131’s mesh networking options using the applet (GUI), see Configuring Mesh Networking on page 9-1 .
set priority Sets bridge priority time in seconds (0-65535) for specified LAN.
hello Sets bridge hello time in seconds (0-10) for specified LAN.
msgage Sets bridge message age time in seconds (6-40) for specified LAN.
fwddelay Sets bridge forward delay time in seconds (4-30) for specified LAN.
ageout Sets bridge forward table entry time in seconds (4-3600) for specified LAN.