Symbol Technologies AP-5131 - Manual (Page 344)

AP-5131 Access Point Product Reference Guide 8-50
AP5131>admin(network.wan.vpn)> set
Description:
Sets VPN entry parameters.
Syntax:
set type Sets the tunnel type to Auto or Manual
for the specified tunnel name.
authalgo Sets the authentication algorithm for to
(
None , MD5 , or SHA1 ).
authkey Sets the AH authentication key (if type is
Manual) for tunnel with the direction set
to
IN or OUT, and the manual authentication key
set to . (The key size is 32 hex characters
for MD5, and 40 hex characters for SHA1).
esp-type Sets the Encapsulating Security Payload (ESP)
type. Options include
None , ESP , or ESP-AUTH .
esp-encalgo Sets the ESP encryption algorithm. Options include
DES , 3DES , AES128 , AES192 , or AES256 ).
esp-enckey Sets the Manual Encryption Key in ASCII for tunnel
and direction
IN or OUT to the key
key>. The size of the key depends on the
encryption algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256
esp-authalgo Sets the ESP authentication algorithm. Options
include
MD5 or SHA1 .
esp-authkey Sets ESP Authentication key either for IN
or OUT direction to , an ASCII string of
hex characters. If authalgo is set to MD5 , then
provide 32 hex characters. If authalgo is set to
SHA1 , provide 40 hex characters.
spi Sets 6 character IN (bound) or OUT (bound) for
AUTH (Manual Authentication) or ESP for
to (a hex value more than 0xFF)
.
usepfs Enables or disables Perfect Forward Secrecy for
.