Symbol Technologies AP-5131 - Manual (Page 362)

AP-5131 Access Point Product Reference Guide 8-68
AP5131>admin(network.wireless.wlan.hotspot.radius)> set
Description:
Sets the Radius hotspot configuration.
Syntax:
Example:
admin(network.wireless.wlan.hotspot.radius)> set server 1 primary 157.235.121.1
admin(network.wireless.wlan.hotspot.radius)> set port 1 primary 1812
admin(network.wireless.wlan.hotspot.radius)> set secret 1 primary sjsharkey
admin(network.wireless.wlan.hotspot.radius)> set acct-mode 1 enable
admin(network.wireless.wlan.hotspot.radius)> set acct-server 1 157.235.14.14
admin(network.wireless.wlan.hotspot.radius)> set acct-port 1 1812
admin(network.wireless.wlan.hotspot.radius)> set acct-secret londonfog
admin(network.wireless.wlan.hotspot.radius)> set acct-timeout 1 25
admin(network.wireless.wlan.hotspot.radius)> set acct-retry 1 10
For information on configuring the Hotspot options available to the AP-5131 using the applet (GUI), see
Configuring WLAN Hotspot Support on page 5-40 .
set server Sets the Radius hotpost server IP address per wlan index (1-16)
port Sets the Radius hotpost server port per wlan index (1-16)
secret Sets the Radius hotspot server shared secret password.
acct-mode Sets the Radius hotspot server accounting mode
(enable/disable)
acct-server Sets the Radius hotspot accounting server IP address per wlan
index (1-16).
acct-port Sets the Radius hotspot accounting server port per wlan index
(1-16).
acct-secret Sets the Radius hotspot server shared secret password per wlan
index (1-16).
acct-timeout Sets the Radius hotspot server accounting timeout period in
seconds (1-25).
acct-retry Sets the Radius hotspot server accounting accounting retry
interval (1-10).