Ap5131>admin(network.wan.vpn)> add – Symbol Technologies AP-5131 User Manual

Page 343

Text mode
Original mode

Command Line Interface Reference 8-49

AP5131>admin(network.wan.vpn)> add

Description:

Adds a VPN tunnel entry.

Syntax:

Example:

admin(network.wan.vpn)>

add 2 SJSharkey 209.235.44.31 206.107.22.46

255.255.255.224 206.107.22.1

If tunnel type is Manual, proper SPI values and Keys must be configured after

adding the tunnel

admin(network.wan.vpn)>

For information on configuring VPN using the applet (GUI), see

Configuring VPN Tunnels on page 6-34

add

Creates a tunnel (1 to 13 characters) to gain access through local WAN IP from the remote subnet
with address and subnet mask using the remote gateway .