Symbol Technologies AP-5131 - Manual (Page 284)

AP-5131 Access Point Product Reference Guide 7-24
2. Refer to the MU List field to reference associated MU address, throughput and retry
information.
3. Click the Refresh button to update the data collections displayed without resetting the data
collections to zero.
4. Click the Echo Test button to display a screen for verifying the link with an associated MU.
For detailed information on conducting a ping test for an MUs, see Pinging Individual MUs
on page 7-27 .
5. Click the MU Authentication Statistics button to display a screen with detailed
authentication statistics for the an MU.
For information on individual MU authentication statistics, see MU Authentication Statistics
on page 7-28 .
6. Click the MU Details button to display a screen with detailed statistics for a selected MU.
For detailed information on individual MU authentication statistics, see Viewing MU Details
on page 7-25.
7. Click the Clear All MU Stats button to reset each of the data collection counters to zero in
order to begin new data collections.
IP Address Displays the IP address of each of the associated MU.
MAC Address Displays the MAC address of each of the associated MU.
WLAN Displays the WLAN name each MU is interoperating with.
Radio Displays the name of the 802.11a or 802.11b/g radio each MU is
associated with.
T-put Displays the total throughput in Megabits per second (Mbps) for
each associated MU.
ABS Displays the Average Bit Speed (ABS) in Megabits per second
(Mbps) for each associated MU.
Retries Displays the average number of retries per packet. A high number
retries could indicate possible network or hardware problems.
NOTE An echo test initiated from the AP-5131 MU Stats Summary screen uses
WNMP pings. Therefore, target clients that are not Symbol MUs are
unable to respond to the echo test.